Port lighting is an essential condition for safe port production. It also serves as an important measure to ensure port night production, the safety of personnel, ships, and vehicles. Port lighting includes lighting for port roads, yard lighting, and port machinery lighting. High-pole lights dominate yard lighting, with more using lift-type high pole lights.
High mast lighting is a method of lighting that uses a series of lamps to illuminate large areas. High-pole lighting is small in footprint, easy and safe maintenance, beautiful appearance and low cost.
The High mast lights used for port lighting are generally between 30-40m high. Monitoring and communication equipment has been extensively used in recent years due to safety and production needs. Many ports have high-pole lighting facilities that allow for broadcasting, monitoring, and wireless communication.
Important Notices for Choosing High Quality Seaport Lighting
High-quality seaport lighting with high power
Gantry cranes are about 10 meters high. This allows them to be very adaptable and has a wide operating range. The general lamps must have a power rating of at least 400W to meet the lighting requirements on the work surface.
Safety and reliability
Port wharf can hold many types of cargo and is a complex place. To ensure lighting safety and avoid fires, it is important to have reliable and safe lighting fixtures.
Longevity
It is difficult to repair a lamp damaged by gantry cranes because of their high height. Therefore, long-lasting lamp types are recommended.
Waterproof, dust proof, anti-corrosion
Ports are always located in humid ocean saline-alkali environments, which means that the lighting requirements for waterproofing and dustproofing as well as anti-corrosion are high. High-quality protection lights can protect the interior of lamps from water vapor, keep them from corroding, and extend the lamp’s service life.
Windproof
Ports and wharves are notorious for their environmental problems, which can lead to strong winds. Therefore, products need to be windproof.
Good light transmittance
Due to the fog at the harbor terminal, lighting lamps with high light transmittance are required in order for the surface to be illuminated.
Lamp lenses should be made from imported PC material that has high transmittance. The light effects are soft and uniform. There are two types of light distribution models available: flooding and projection. These can be used to meet different lighting requirements.
Lamp lenses should be made from imported PC material that has high transmittance.
Excellent color rendering
High-quality color rendering is necessary. It would be easy to confuse the goods if the CRI is bad especially at night.
Energy savings
The city’s heart is its shipping port. It is the heart of a city. You are looking for an LED seaport lighting design? We are a trusted supplier of high-power LED flood lights for seaports. Our engineers can offer professional advice regarding lighting selection.
Why Should We Change The Traditional Port Lighting System To The LED Port Lighting System?
Quickly turns on/off the light
Safety and security are paramount in the port area. Traditional metal halide lamps have the disadvantage that they can take a while to turn on or off after being turned off. With LED harbor lights, lighting has never been easier or safer. These lights can be switched on and off instantly and can be used in a matter of seconds. This greatly increases the port’s security. The harbour will be safer after the LED port lighting system is installed.
Energy efficiency: More efficient
LED seaport lights offer many benefits to the port. They are also extremely energy-efficient and consume about 75 percent less electricity. They also retain their original brightness throughout the life of their lifespan. They don’t flash, hum, or flash like traditional lighting technology. Additionally, because they last a long time, LED port light have low maintenance costs and are free of harmful chemicals.
High quality lights
LED lights are highly effective in displaying objects clearly. It can be tested using CRI and chromatography. Similar results can be achieved with leds that emit high-quality, controllable lighting.
Why You Need To Choose Our LED Seaport Flood Light ?
Our LED seaport lights are 80% energy-saving
Because it consumes 80% less energy than MH lamps, we recommend Roza LED flood lights Roza series for seaport use. Although LED flood lights are practical and cost-effective, they can be installed more quickly than MH lamps due to the patent design and high-end technology involved. Converting to our flood lights can save you up to $300,000.
Light efficiency 2-3 times greater
Our LED flood lights are 500-1500W with a patent optical design. Each chip has a calculus optical lens that is cut at different angles to maximise the use of each point source. Its light efficiency is 2-3x higher than other LED lights.
IP66 Waterproof and Anti-corrosion
Outdoor lighting at seaports is more challenging. LED flood lights must be waterproof and capable of withstanding extremely high or low ambient temperatures as well as the humid ocean saline-alkali environments. To ensure an enhanced user experience, our Roza LED floodlights are IP66 waterproof. Customers can also request special anti-corrosion treatment.
Seaport lighting: Scientific wind resistance design
The Roza LED floodlight series is a patented design that offers superior wind resistance. Our engineers have considered the effects of strong winds on lights mounted on high-pressure air. This ensures that our lights are safe and durable.
Our LED flood lights for seaports have excellent cooling systems
The biggest enemy of LED high mast lighting is temperature. LED chips can be damaged by persistent heat, which can reduce brightness and decrease their service life. We developed a patent cooling system that uses air convection, thin cooling fins and light weight to solve this problem. Our heat dissipation bodies are 40% larger than most lamps and have a longer life span.
Seaport lighting has a long life expectancy and requires no maintenance.
Roza series lasts more than 80,000 hours. This means that if you use the lamp for 8 hours per day, you won’t have to worry about replacing it or having to re-install it. We can compare the service lives of different lighting equipment, such as fluorescent lamps for 10000 hours, HPS and LPS for 20000, metal halide lasting for 8000 hours, and HPS for LPS for 20000. It has the highest performance.
Free lighting design
We all know that seaports are divided into different sections. Different areas require different lighting standards because of different uses. VKS is happy to provide a free lighting layout design. We just need to know more about your seaports. We will need to see a drawing or photos of your seaports in order to fully understand them. Then we can recommend the best lighting design for you.
Post time: Apr-07-2023
